Assigning A Title Or Artist Name To A Track; Name Function; Album Or Play List Name Function - Sony HAR-LH500 Operating Instructions Manual

Assigning a title or artist
name to a track, album or
play list
–– Name Function
You can enter a title or artist name for albums
and play lists as well as for individual tracks.
Name can consist of uppercase and lowercase
letters, numbers and symbols. Up to 127
characters can be entered for each name.
You can assign titles or artist names in the
following ways.
• Using the buttons and controls on the remote
or the recorder (this page and page 29).
• Using a keyboard connected to the recorder's
KEYBOARD connector (page 33).
• Using the keyboard of your computer. (Refer
to the "M-crew for HAR-LH500" Help
included on the supplied CD-ROM.)
• Using the "M-crew for HAR-LH500" software
to assign titles or artist names automatically
from Gracenote CDDB
"M-crew for HAR-LH500" Help included on
the supplied CD-ROM.)
Before the operation, press HDD or press CD/
HDD on the recorder to light up the HDD
indicator.
Notes
• You cannot add a title or an artist name while
recording.
• You cannot name tracks in a play list. Track names
in a play list cannot be erased or changed.
Tips
• You can use the ALBUM dial on the recorder
instead of the <, ,, or ENTER button on the
remote to select and enter items in Edit Menu or
Setup Menu.
To select an item: Turn the ALBUM dial towards
+/–.
To enter a selection: Press the ALBUM dial.
• You can also use the ALBUM +/– buttons instead of
the </, buttons to select items in Edit Menu or
Setup Menu.
28
®
server. (Refer to the
Assigning a title using the
controls on the remote
1
After selecting the album you want to
edit, press NAME EDIT/SELECT
depending on what you want to name.
To name Press while
A track The recorder is playing (the track
number is displayed).
An album or The recorder is stopped with the
play list total number of tracks displayed.
A flashing cursor appears in the display.
2
Press NAME EDIT/SELECT repeatedly
to select the character type.
Each time you press the button, the display
changes as follows:
"Selected AB" (Upper cases or symbols*)
t "Selected ab" (Lower cases or
symbols*) t "Selected 12" (Numbers)
* Only ' – / , . ( ) : ! ? can be selected.
You can enter a space by pressing the 0/10
button.
3
Enter a character using letter/numeric
buttons.
If you have selected upper cases
or lower cases
1 Press corresponding letter/numeric button
repeatedly until the character you want to
enter flashes.
Or press ALBUM +/– repeatedly.
2 Press >.
The flashing character is entered and
lights continuously and the cursor shifts
to the right.
4
Repeat steps 2 and 3 to enter the rest
of the name.
To change a character
Press ./> repeatedly until the
character you want to change flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
5
Press YES.
"Complete!" appears for a few seconds.