Assigning A Title Or Artist Name To; Name Function; A Track, Album Or Play List Name Function - Sony HAR-D1000 Operating Instructions Manual

Assigning a title or artist
name to a track, album or
play list
–– Name Function
You can enter a title or artist name for albums
and play lists as well as for individual tracks.
Name can consist of uppercase and lowercase
letters, numbers and symbols. Up to 127
characters can be entered for each name.
When using the remote, set SELECT to HDD.
Notes
• If you name a track while it is being recorded, be
sure to finish the naming operation before the track
ends. If the track ends before you have completed
the naming operation, the entered character data
will be discarded and track will remain unnamed.
• You cannot name an album during recording.
• You cannot name tracks in a play list. Track names
in a play list cannot be erased or changed.
Assigning a title or artist
name using the controls on
the recorder
1
While the recorder is stopped, playing
or paused, press MENU/NO after
selecting the album you want to edit.
"Edit Menu" appears in the display.
2
Turn ALBUM dial until "Name In?"
flashes in the display, then press
ALBUM dial or YES.
3
Turn ALBUM dial to select the item,
then press ALBUM dial or YES.
To
Assign a title to a track,
album or play list
Assign an artist name
to a track, album or
play list
While the recorder is recording, a flashing
cursor appears in the display and you can
enter a name of the track being recorded. In
this case, go to step 5.
Select
Nm Title?.
Nm Artist?.
4
Turn ALBUM dial to select the item,
then press ALBUM dial or YES.
To
Name a track
Name an album or play
list
A flashing cursor appears.
The recorder starts playing and you can
assign a title or artist name while
monitoring the sound. (for track only)
5
Press SEARCH/CHAR repeatedly to
select the character type.
Each time you press the button, the display
changes as follows:
(Blank space) t A (Upper cases) t a
(Lower cases) t 0 (Numbers) t '
(Symbols)
To enter a space
Press HDD L while the cursor is
flashing.
6
Turn ALBUM dial to select the
character.
The selected character flashes.
To enter a symbol
You can use the following symbols in
names:
' – / , . ( ) : ! ? & + < > _ = " ; # $ % @ * `
To change a selected character
Repeat steps 5 and 6.
7
Press ALBUM dial.
The selected character is entered and lights
continuously. The cursor shifts to the right,
flashes and waits for the input of the next
character.
Select
A track number.
Album.
continued
27