Acd Agent Operation; Programming The Agent Log-On/Off Key - ESI -1000 User Manual

Phone
Hide thumbs Also See for ESI-1000:
Table of Contents

Advertisement

User's Guide

ACD agent operation

(Not available on the legacy 12-Key Feature Phone.)
Important: You are being assigned a special feature not explained in the regular station User's Guide or tutorial. Be
sure to get your ACD department number from the system administrator.
1
An ACD
department is made up of agents who, when logged on, can receive calls for that department.
Calls go to the logged-on agent who has been idle for the longest time since answering his/her last ACD call.
If all logged-on agents are busy, the ESI system places the calls in a holding queue and automatically connects
the longest-holding call when an agent becomes available. While holding, callers hear periodic prompts to
continue to hold. As an ACD department agent, you must have one of your phone's programmable feature keys
programmed as an agent log-on/off key
key lets you manually place yourself in or out of service for that department's calls.
Notes: It is possible to be logged into two departments at once. Consult your Installer or System Administrator to
confirm whether this is available on your particular ESI system.
If no agents are logged on, incoming calls immediately follow that department's call-forwarding routing.

Programming the agent log-on/off key

1. Enter Help mode by pressing PROG/HELP.
2. Press 3. Now Help mode will describe each key you press.
3. Press each programmable feature key to determine the location of the log-on/off key (the keys have been
assigned beginning with the lower left-hand programmable feature key).
4. Press PROG/HELP again to leave Help mode.
5. To program a new key location (or if one has not previously been programmed):
(a.) Hold down the desired programmable feature key for at least two seconds, to enter programming mode.
(b.) Dial 5 plus the department number.
(c.) Press the programmable feature key again.
1
Automatic call distribution.
2
This key is automatically assigned when an extension is set up as a member of an ACD department.
2
(see below) for each ACD department to which you're assigned. This
I.1
ACD agent operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents