Comtech EF Data LPOD Installation And Operation Manual page 143

LPOD Outdoor Amplifier / Block Up Converter (BUC)
Serial-based Remote Product Management
Command Arguments
(Instruction for Command
Parameter Type
Code and or Response
Qualifier) to Query
Set RTC Time TIM= 6 bytes
Temperature N/A 5 bytes
Retrieve Number N/A 2 bytes
of Unread Stored
Alarms
E
Retrieve Number N/A 2 bytes,
of Unread Stored numerical
Events
Time Protocol TPE= 1 byte,
Enable numerical
Time Protocol TPS= 15 bytes,
Server alpha-numeric
Description of Arguments
(Note that all arguments are printable ASCII characters)
Command or Query.
Sets or returns the real-time clock time, from midnight, in the form hhmmss, where:
hh = hours, from 00 to 23
mm = minutes, from 00 to 59
ss = seconds, from 00 to 59
Example (time = 23 hours, 12 minutes and 59 seconds since midnight): <1/TIM=231259'cr'
>0001/TIM='cr''lf'
Query only.
Returns the temperatures of the Heatsink in the form of sxxxx, where:
s = sign (+) or (-)
xxxx = temperature.
Example: <1/TMP=+26.0
Query only.
Returns the number of stored alarms that remain unread in the alarm log, in the form xx. A maximum of 255
events may be stored in the alarm log. Numbers over 99 are reported as 99.
Example reply: <1/TNA? 'cr'
>0001/TNA=14'cr''lf'
Query Only.
Returns the number of stored events that remain unread in the events logs, in the form xx.
Example: <1/TNE? 'cr'
>0001/TNE=18'cr''lf'
Command or Query.
Sets or returns the Time Protocol setting in the form x, where:
0 = Time protocol disabled
1 = Time protocol enabled
Example (Time protocol enabled): <1/TPE=1'cr'
Command or Query.
Sets or returns the Time Server IP address for the Unit Tx Ethernet management port, in the form
xxx.xxx.xxx.xxx
Default value: 255.255.255.255
Example: <1/TPS=192.168.001.005
5–35
Revision 9
MN-LPOD
Response to Query
Response to Query
Command (Instruction
(Target to
(Target to Code and
Controller)
Controller) Qualifier)
TIM = TIM? TIM=xxxxxx
TIM? (See Description of
TIM * Arguments)
TMP= TMP? TMP=sxxxx
(See Description of
Arguments)
TNA= TNA? TNA=xx
(See Description of
Arguments)
TNE= TNE? TNE=xx
(See Description of
Arguments)
TPE= TPE? TPE=x
TPE? (See Description of
Arguments)
TPS= TPS? TPS=
TPS? xx.xxx.xxx.xxx.yy
(See Description of
Arguments)