Comtech EF Data LPOD Installation And Operation Manual page 139

LPOD Outdoor Amplifier / Block Up Converter (BUC)
Serial-based Remote Product Management
Command Arguments
(Instruction for Command
Parameter Type
Code and or Response
Qualifier) to Query
Retrieve Next 5 N/A 75 bytes
Unread Stored
Statistics
Serial Number N/A 9 bytes
E
Retrieve Utility N/A 23 bytes,
Status alpha- numeric
Description of Arguments
(Note that all arguments are printable ASCII characters)
Query only.
Returns the oldest 5 unread stored statistics entries in the reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}Sub-body, where:
Sub-body= ddmmyyhhmmssaaa.abbb.bccc.cdd.ddefghhh.hiii.i
ddmmyy = day/month/year
hhmmss = hour:minute:second
aaa.a = Operating Temperature (I.E. +40.0)
bbb.b = Amp Temperature (I.E. +40.0)
ccc.c = RF Power output
dd.dd = Attenuation Setting
e = Amp On/Off
f = Mute On/Off
g = Online/Offline Status
hhh.h = LNB Current (mA)
iii.i = BUC Tuning Voltage
If there are less than 5 entries to be retrieved, the remaining positions are padded with zeros. If there are no new
entries, the response is RNS*.
Query only.
Returns the unit's 9 digit serial number in the form of xxxxxxxxx.
Example: <1/RSN?'cr'
>0001/RSN=072282040'cr''lf'
Query only.
Returns the utility status of the unit.
Example: <1/RUS='cr'
>0001/RUS='cr'
ADR=0001'cr'
BDR=09600'cr'
REF=087'cr''lf' (see Note)
Note: REF will only appear if a reference oscillator is installed.
5–31
Revision 9
MN-LPOD
Response to Query
Response to Query
Command (Instruction
(Target to
(Target to Code and
Controller)
Controller) Qualifier)
RNS= RNS? RNS={CR}Sub-
body{CR}Sub-
body{CR}Sub-
body{CR}Sub-
body{CR}Sub-body
(See Description of
Arguments)
RSN= RSN? RSN=xxxxxxxxx
(See Description of
Arguments)
RUS= RUS? RUS=x....x
(See Description of
Arguments)