LPOD Outdoor Amplifier / Block Up Converter
Ethernet-based Remote Product Management
LNB Current Graph
This graph displays the LNB current only if an LNB is connected to the system and is drawing
current from the LNB current source.
Amplifier Status Graph
This graph displays the state of the RF amplifier (On/Off). Note that, as shown in the example,
On is represented by a 1 (one); Off is represented by a 0 (zero); if no data is available, then a -1
(negative one) is displayed.
Mute State Graph
4–34
Revision 9
MN-LPOD