Comtech EF Data LPOD Installation And Operation Manual page 125

LPOD Outdoor Amplifier / Block Up Converter (BUC)
Serial-based Remote Product Management
Command Arguments
(Instruction for Command
Parameter Type
Code and or Response
Qualifier) to Query
Set RTC (Real- DAT= 6 bytes
Time-Clock) Date
E
Set RTC (Real- DAY= 6 bytes
Time-Clock) Date
Enable Statistics ESA= 1 byte
Averaging
Enable Statistics ESL= 1 byte
Logging
Description of Arguments
(Note that all arguments are printable ASCII characters)
Command or Query.
Sets or returns the real-time clock date in the form mmddyy, where;
dd = day of the month, from 01 to 31,
mm = month of the year, from 01 to 12
yy = year, from 00 to 96 (2000 to 2096)
Example (date = April 24, 2003):
<1/DAT=042403'cr'
>0001/DAT='cr''lf'
Command or Query.
Sets or returns the real-time clock date in the form ddmmyy, where;
dd = day of the month, from 01 and 31,
mm = month of the year, from 01 to 12
yy = year, from 00 to 99 (2000 to 2099)
Example (date = April 24, 2003):
<1/DAY=240403'cr'
>0001/DAY='cr''lf'
Command or Query.
Enables or Disables averaging of statistics data at a rate of once per second for 10 seconds, in the form x,
where:
0 = Disable (default value)(see Note)
1 = Enable
Note: If Disabled, burst values will be logged instead of averaged values.
Example: <1/ESA=0'cr'
>0001/ESA='cr''lf'
Command or Query.
Sets or returns the statistics logging function in the form x, where:
0 = Disable (default value)
1 = Enable
Example: <1/ESL=1'cr'
>0001/ESL='cr''lf'
5–17
Revision 9
MN-LPOD
Response to Query
Response to Query
Command (Instruction
(Target to
(Target to Code and
Controller)
Controller) Qualifier)
DAT= mmddyy
DAT= DAT?
DAT? (See Description of
DAT* Arguments)
DAY= ddmmyy (See
DAY= DAY?
DAY? Description of
DAY* Arguments)
ESA= ESA? ESA=x
ESA? (See Description of
ESA* Arguments)
ESL= ESL? ESL=x
ESL? (See Description of
ESL* Arguments)