Comtech EF Data LPOD Installation And Operation Manual page 142

LPOD Outdoor Amplifier / Block Up Converter (BUC)
Serial-based Remote Product Management
Command Arguments
(Instruction for Command
Parameter Type
Code and or Response
Qualifier) to Query
SNMP SSL= 255 bytes,
System Location characters,
SNMP SSN= 16 bytes,
Unit Name characters,
SNMP Trap STA= 15 bytes,
Destination IP Numerical
Address 1
SNMP Trap STB= 15 bytes,
Destination IP Numerical
Address 2
SNMP STV= 1 byte
Trap Version
SNMP SWC= 16bytes,
Write characters, no
Community spaces
Software Revision N/A 34-37 bytes
Description of Arguments
(Note that all arguments are printable ASCII characters)
Command or Query.
Sets or returns the SNMP System Location string
Example: <1/SSL=Upstairs back right.
Note: If not configured it returns empty string. <1/SSL=
Command or Query.
Sets or returns the SNMP System Name string
Example: <1/SSN=Remote1.
Note: If not configured it returns empty string. <1/SSC=
Command or Query.
Sets or returns the IP address of the first SNMP Trap destination IP Address 1 where traps will be sent, in the
form xxx.xxx.xxx.xxx
Example: <1/STA=010.006.030.001
Note: When not configured, returns >0001/STA=0.0.0.0
Command or Query.
Sets or returns the IP address of the first SNMP Trap destination IP Address 2 where traps will be sent, in the
form xxx.xxx.xxx.xxx
Example: <1/STB=010.006.030.001
Note: When not configured, returns >0001/STB=0.0.0.0
Command or Query.
Sets or returns the SNMP Trap Version that will be used to send traps.
1=SNMP Trap Version 1
2=SNMP Trap Version 2
Example: <1/STV=0
Command or Query.
Sets or returns the SNMP write community string. Empty string is not allowed
Example: <1/SWC=private
Query only.
Returns the value of the internal software revision installed in the unit, in the form:
Boot:x.y.z Bulk1:x.y.z Bulk2:x.y.z
-or-
Boot:x.y.zz Bulk1:x.y.zz Bulk2:x.y.zz
5–34
Revision 9
MN-LPOD
Response to Query
Response to Query
Command (Instruction
(Target to
(Target to Code and
Controller)
Controller) Qualifier)
SSL = SSL? SSL =x [1..128]
SSL! (see Description of
Arguments)
SSN = SSN? SSN =x [1..128]
SSN! (see Description of
Arguments)
STA = STA? STA=xxx.xxx.xxx.xxx
STA! (see Description of
Arguments)
STB = STB? STB=xxx.xxx.xxx.xxx
STB! (see Description of
Arguments)
STV = STV? STV =x
STV! (see Description of
Arguments)
SWC = SWC? SWC =x
SWC! (see Description of
Arguments)
SWR= SWR? SWR=Boot:x.y.zz
Bulk1:x.y.zz
Bulk2:x.y.zz
(See Description of
Arguments)