Comtech EF Data LPOD Installation And Operation Manual page 137

LPOD Outdoor Amplifier / Block Up Converter (BUC)
Serial-based Remote Product Management
Command Arguments
(Instruction for Command
Parameter Type
Code and or Response
Qualifier) to Query
Retrieve N/A 213 bytes,
Maintenance alpha- numeric
Status
Description of Arguments
(Note that all arguments are printable ASCII characters)
Query only.
Returns maintenance status where:
P24V1 = +24V power supply
P24V2 = +24V switch power supply
LNBVT = +13/18V LNB power supply (see Note)
P13VT = +13.5V power supply
P10V1 = +10V1 power supply
A10V1 = 10V1 on RF Module
A10V2 = 10V2 on RF Module (see Note)
P7V8T = +7.8V power supply
P5V8T = +5.8V power supply
P2V5T = +2.5V power supply
P1V2T = +1.2V power supply
N5V8T = -5.8V power supply
FANR1 = Fan 1 speed in percent
FANR2 = Fan 2 speed in percent (see Note)
BUCVT = BUC tuning voltage (see Note)
FWPWR = Forward power in dBm
REFVT = Reference osc. tuning voltage (see Note)
LNBCS = LNB current supply in mA (see Note)
ATEMP = Heatsink temperature in Celsius
OTEMP = Outdoor temperature in Celsius (see Note)
Note: LNBVT, FANR2, A10V2, BUCVT, REFVT, LNBCS, and OTEMP will appear if the appropriate options are installed;
otherwise, the values will report XXXX.
Example: <1/RMS?'cr'
>0001/RMS='cr'
P24V1=024.1'cr'
P24V2=024.1'cr'
LNBVT=018.2'cr'
P13VT=013.4'cr'
P10V1=010.1'cr'
A10V1=010.1'cr'
A10V2=010.1'cr'
P7V8T=007.8'cr'
P5V8T=005.8'cr'
P2V5T=002.5'cr'
P1V2T=001.2'cr'
N5V8T=-05.7'cr'
FANR1=100.0'cr'
FANR2=100.0'cr'
BUCVT=008.3'cr'
FWPWR=+53.2'cr'
REFVT=001.8'cr'
LNBCS=380.2'cr'
ATEMP=+40.0'cr'
OTEMP=+25.0'cr'
5–29
Revision 9
MN-LPOD
Response to Query
Response to Query
Command (Instruction
(Target to
(Target to Code and
Controller)
Controller) Qualifier)
RMS= RMS? RMS=x....x
(See Description of
Arguments)