Rep 7.11 Upper Media Roll Heater - Xerox 8850 Service Manual

REP 7.11 Upper Media Roll Heater

Parts List on PL 7.1
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1. Remove Roll Media Supply Drawer 1
1
Disconnect the connector
8850/ 510DP
WARNING
(REP 7.1).
Upper Media Roll Heater
and Guard
2
Remove the screws (2)
and lift out the Upper
Media Roll Heater and
Guard
Figure 1 Removing the Upper Media Roll Heater
Be sure to support the Media Roll Heater/Guard with your hand while removing the mounting
screws in the next step.
2. (Figure 1): Remove the Upper Media Roll Heater.
3
Slide the Media Roll
Heater out from Heater
Guard
03/2003
4-19
CAUTION
Repairs and Adjustments
REP 7.11