Command Terminator 1
Purpose:
Terminates the current command.
Syntax:
<NUL>
Command Terminator 2
Purpose:
Terminates the current command.
Syntax:
<LF>
Configuration Parameters, Transmit
Purpose:
Uploads the current configuration commands from the printer.
Syntax:
<ESC>p
Notes:
The printer transmits only the configuration parameters that you can set
from the host.
Use this command to view, edit, or copy the current configuration
command settings.
Refer to Appendix A, "Printer Reference," for a complete list of the
configuration parameters that the printer uploads to the host.
Cut
Syntax:
<SO>
Notes:
The 3440 printer ignores this command.
C o d e 3 9
N
HelvC
ugFont
Print Mode Commands
*1233*
FG 9pt Italic
6
6-23