Rewinder Full Batch Take-Upassembly - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions
Rewinder Full Batch Take-Up Assembly
OPERATION:
The media batch take up spool assembly is part of rewinder full batch take-up kit. The kit is available as an accessory that
include installation instructions. This section does not contain instructions on how to replace the rewinder full batch take-up
kit. The installation and replacement instructions will be covered on next revision of this service work instructions.
Tools Required
Description
Torx Driver
Parts Required
Item Part Number
1 203-974-001
2 203-976-001
3 203-972-001
4 234-053S-0300
5 236-259-001
6 236-284-001
7 710-089S-001
Rewinder Full Batch Take-up and Peel-Off Kit Replacement
1. All accessories are available in the price guide including installation instructions. See Price Guide under Accessories for both
PM43 and PM43c printer models. Go to
Manuals to download the installation instructions for all accessories.
Full Batch Take-Up Assembly, Media Side
Description
Peel-Off, Kit
Rewinder Full Batch Take-Up Accessory Kit
Core, 3 Inch, Accessory Kit, PM43
PCB, Rewinder Motor Driver, Spare, PM43
Cable, Assembly, MLB, Full Rewinder
Cable, Assembly, MLB, Rewinder
Media Rewinder, Sub-Assembly, Spare, PM43
http://www.intermec.com/partner-products/prtrpm43a/selling-points.aspx
Intermec Proprietary Document
Model DOCUMENT NO.
PM43,PM43C SWIPM43x-000
Part Number
T20
Full Batch Take-Up Assembly, Electronic Side
PAGE
Page
66 of 70
Qty
1
1
1
1
1
1
1
under