Label And Gap Length, Transmit; Remaining Quantity And Batch Count, Transmit; Reset - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Label and Gap Length, Transmit

Purpose: Transmits the label and gap length as measured by the number of 5 mil
increments.
Syntax:
<ESC>L
Notes: Label length refers to the length of the label currently being processed. If the
label is longer than the distance between the label sensor and the printhead,
the printer transmits the length of the previous label.
If you select continuous stock, the printer transmits the length defined by
the <SI>L command (default is 2000). The gap length is 0.

Remaining Quantity and Batch Count, Transmit

Purpose: Uploads the remaining quantity and batch counts for the current print job.
Syntax:
<ESC>Q

Reset

Purpose: Executes a printer power-up reset immediately.
Syntax:
<DLE>
Notes: The printer erases all data and commands in the input buffer upon reset.
6-18
*1233*
FranklinGothic
FG 9pt Italic
*1233*