Cold-Boot Failure - Symbol Series 3100 Product Reference Manual

Series 3100/3500 Product Reference Guide
46-Key Terminal:
1. Power off the terminal.
2. Press and hold <A>, <B>, and <D>.
3. Press and release <PWR>.
4. Release <A>, <B>, and <D>.
47-Key Terminal
1. Power off the terminal.
2. Press and hold <A>, <B>, and <D>.
3. Press and release <PWR>.
4. Release <A>, <B>, and <D>.
The terminal displays a copyright message, amount of RAM, and expanded memory.
Other messages are displayed as well, depending on the system configuration.

Cold-Boot Failure

During a cold boot, the system briefly displays a status line for each driver as it loads
in the format:
The line shows a status value, usually 0, followed by the name and version number of
the driver. If the system halts at one of these lines and displays a status value other than
0, the displayed device driver failed to load properly.
If such a failure occurs, the terminal may need to be cold booted. If this does not solve
the problem, call Symbol Support Center.
More troubleshooting information is found in the publications listed at the beginning
of this manual.
4-8
0: Driver #.##