Integrated Laser Scanner
Setting the Trigger
The integrated scanner has a unique trigger that the operator can configure. To use the
integrated laser scanner:
1.
Power on the system and scanner by pressing <PWR> or the scanner trigger.
2.
Lift up and turn the the scan element on the top of the terminal to the preferred
orientation for scanning (refer to Figure 4-3). The scan head turns only toward the
back of the terminal.
3.
Lock the scan head in position, facing the side of the terminal.
4.
To select the trigger, press the <FUNC> key and the trigger you are most
comfortable using. The other trigger defaults to an ALPHA shift key. Depending
on the application, the terminal may beep to indicate a trigger is selected.
Figure 4-3. Positioning the Scanner
Operating the Series 3100/3500
4-19