Symbol Series 3100 Product Reference Manual page 113

3115 Communications/Charger Adapter
(PDT 3100 and KT-12596-01 Only)
The optional 3115 Communications/Charger Adapter (CCA) provides power from a
wall-mounted power supply for recharging the NiCd battery while the terminal is in
use.
To charge the terminal using the 3115 CCA (refer to Figure 6-6):
1. Plug the 10-pin RJ41 connector in the terminal base.
2. Plug the connector from the 15V power supply, P/N 59915-00-00 (US, 115V) or
60507-00-00 (International, 230V) in the CCA's power input jack.
3. Plug the power supply in a wall socket.
Figure 6-6. Connections for Charging with the 3115 CCA (PDT 3100 ONLY)
NiCd batteries recharge fully in 12 to 16 hours.
Note: For the PDT 3100, you may only charge the battery KT-
12596-01 in the terminal through the 3115 CCA.
Other Charging Options
Note that you can charge the KT-12596-01 battery pack using the Universal Four-Slot
Charger (3004-xxx) or the UBC 1000 Charger. Use the UBC 1000 Charger to charge the
KT-12596-01, 21-14969-01, and 21-14969-02 battery packs.
3115 CCA
DB25
Maintaining the 3100/3500 Terminal
RJ41
Power Input Jack
6-13