Boot Up Event
Parameter # F0h, 02h
When enabled, the digital imager scanner generates a message to the host when power is applied. When disabled,
no notification is sent.
Enable Boot Up Event
(01h)
Parameter Event
Parameter # F0h, 03h
When enabled, the digital imager scanner generates a message to the host when one of the events specified in
Table 6-2 on page 6-14
Enable Parameter Event
(01h)
occurs. When disabled, no notification is sent.
SSI Interface 6 - 15
*
Disable Boot Up Event
(00h)
*
Disable Parameter Event
(00h)