Series 3100 / 3500 Product Reference Guide
Hardware Requirements
The following hardware is required to initialize a batch or Spectrum One radio
terminal:
• Terminal
• 1- or 4-Slot Cradle
OR
3115 Charging and Communications Adapter
• RS-232 Serial Null Modem Cable
• Power Supply
• Host PC
Communications
For terminals being used in a direct communications (batch) environment or a
Spectrum One network environment, applications are transferred from a host
computer to the terminal:
• over a communications line using a null modem connected to the cradle
OR
• through the communications/charger adapter.
The procedure uses the SENDHEX command on the host computer and the Program
Loader function (from Command Mode) on the terminal.
Note:
For details on the SENDHEX command, refer to the
Series 3000 Application Programmer's Manual.
Other software may be used in place of SENDHEX.
2-4