Boot Up Event; Parameter Event - Symbol SE955 Integration Manual

8-72 SE955 Integration Guide

Boot Up Event

Parameter # 0xF0 0x02
When enabled, the decoder sends a message to the host whenever power is applied. When disabled, no message is sent.

Parameter Event

Parameter # 0xF0 0x03
When enabled, the decoder sends a message to the host when one of the events specified in
disabled, no message is sent.
Enable
(0x01)
*Disable
(0x00)
Enable
(0x01)
*Disable
(0x00)
Table 8-2 on page 8-71 occurs. When