Series 3100/3500 Product Reference Guide
Replacing NiCd or NiMH Batteries (PDT 3500)
For the PDT 3500, each type of battery uses a battery pack of the same physical form.
Installation and replacement are the same for all battery types.
To Remove a PDT 3500 Battery Pack:
1.
Power the terminal off.
2.
Release the hand strap.
3.
Grasp the tab (shown in Figure 6-3) at the top of the battery pack and pull back.
4.
Lift the battery up from the compartment, tabbed edge first.
Figure 6-3. PDT 3500 Battery Pack Removal
5.
If it is rechargeable, recharge the old battery pack. Refer toNiCd or NiMH Battery
Charging (PDT 3100 and PDT 3500).
Dispose of dead batteries in accordance with battery label in-
structions.
6-10
Tab
Battery Pack
Caution