Replacing Nicd Or Nimh Batteries (Pdt 3100) - Symbol Series 3100 Product Reference Manual

Replacing NiCd or NiMH Batteries (PDT 3100)

To replace an alkaline battery with a rechargeable NiCd or NiMH battery pack, or to
replace a NiCd or NiMH battery pack:
1. Power the terminal off.
2. Release the hand strap.
3. Unlock and remove the battery compartment door.
4. If the previous battery was an alkaline, gently remove the 9V connector fromthe 9V
socket. Do NOT tug on connector wires. Store the connector.
5. Plug the battery connector in the rechargeable battery socket immediately below
the 9V socket (refer to Figure 6-2).
6. Fit the NiCd or NiMH battery pack in the compartment next to the adapter.
7. Verify that the battery and connector are properly seated.
NiCd Battery
Battery
Connector
Figure 6-2. PDT 3100 Battery Replacement
8. Replace and lock the battery compartment cover.
9. Reattach the hand strap.
10. Recharge the battery pack (refer to NiCd or NiMH Battery Recharging).
Hold Plugs
Battery
Sockets
Handstrap
Connector
Maintaining the 3100/3500 Terminal
Handstrap
Battery
Compartment
Latch
Battery
Compartment
Door
6-9