Download Over the Network: Neither BOOTP or DHCP
If a BOOTP or DHCP server is not used, the information these servers provide must be
obtained in other ways (i.e., the IP address is entered manually using CFG24).
1.
Edit NET.CFG (refer to the section Editing NET.CFG for a more detailed
discussion). Add a control section and noboot parameter:
Spectrum24 control
Noboot
2.
Proceed with saving the NET.CFG file, building and downloading a new HEX file,
and connecting to the network as described in Download Over the Network: DHCP.
Introduction to Spectrum24 RF Terminals
3-13