Symbol Series 3100 Product Reference Manual page 80

Series 3100/3500 Product Reference Guide
4. Attach one end of the telephone cable to the modem jack connection (Figure 4-17).
5. Plug the cable's other connector into a telephone jack.
6. Power the terminal back on.
7. Start the communications program on the host and terminal.
Integrated: Acoustic (PDT 3100, 3110, 3124 only)
Some Series 31XX/35XX terminals are equipped with a built-in acoustic modem which
allows direct data transmission over a telephone line.
If the terminal is equipped with an acoustic modem, connect the modem as follows:
1. Power the terminal off.
2. Release the hand strap on the back of the terminal.
3. Place the telephone mouthpiece against the acoustic coupler.
4-34
Figure 4-17. Modem Jack Location
Modem Jack