Series 3100/3500 Product Reference Guide
With a Printer
The terminal has two accessories which provide communications with a printer, the
3115 CCA and the passive cable.
3115 CCA
To connect the 31XX/35XX to a printer using the 3115 CCA:
1.
Plug the 10-pin RJ-41 connector into the base of a Series 3100/3500 terminal.
2.
Plug the DB-25 connector into the printer's communications port.
3.
Start the communications program.
Note:
The CCA is shipped set for RS-232 communications with a PC. To
use the CCA with a printer may require changing the internal
communications settings. Refer to the Installation Instructions (P/N
70-11314-XX).
Passive Cable
An optional cable is available for connecting the terminal to a printer (Figure 4-16)
(P/N 20-11062-03).
4-32
DB9
Connector
to Printer
Comm
Port
Figure 4-16. Passive Cable Connectors
RJ41
Connector
to Terminal
Serial
Port