To Install a New or Recharged Battery Pack:
Spaces for
Post
Figure 6-4. PDT 3500 Battery Pack Replacement
1.
Insert the battery in the bottom of the compartment. Two posts on the battery pack
must fit in corresponding spaces in the housing (refer to Figure 6-4).
2.
Push the battery pack forward until it lies flat in the compartment, flush with the
housing. When it lies in this position, the lift tab should snap in and the contacts
should meet.
3.
Reattach the hand strap.
s
Maintaining the 3100/3500 Terminal
Battery
Compartment
Battery
Pack
Posts
6-11