CHAPTER 3
8454
HYDRAULIC HOSES
1. Disconnect the main delivery hose (1), return hose
(2), right turning delivery hose (3) and left turning
delivery hose (4).
(When reassembling)
•
In assembling the turning delivery hoses to the
steering controller, connect the delivery hose with
identification mark (type) "A" to the L port of the steer-
ing controller.
Tightening
Main delivery
torque
hose retaining
nut
Turning delivery
hose retaining
nut
PANEL FRAME AND STEERING ASSEMBLY
1. Remove the panel frame mounting crews (Two
screws a upper part. Seven screws at lower part).
2. Take out the panel frame and steering assembly as
a unit.
(When reassembling)
•
Do not get in the wiring harness between panel
frame and platform.
3-8
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
46.6 ~ 50.9 N·m
4.8 ~ 5.2 kgf·m
34.4 ~ 37.6 lbf·ft
24.5 ~ 29.4 N·m
2.5 ~ 3.0 kgf·m
18.1 ~ 21.7 lbf·ft
(1) Steering Hose P
(2) Steering Hose T
569W307A
(3) Steering Hose R
(4) Steering Hose L
569W308A
D569-W02 May-2003