Cub Cadet 8454 Service Manual page 222

CHAPTER 6 8454
B. HYDRAULIC CYLINDER ASSEMBLY
1. Loosen the joint bolt (1).
2. Loosen and remove the hydraulic cylinder assem-
bly mounting bolts ((6), (7), (8), (9)), spring wash-
ers (5) and nuts (4).
3. Support the hydraulic cylinder assembly with nylon
lift strap and hoist, and then take out it.
(When reassembling)
Tightening Hydraulic cylinder
torque mounting bolts
and nuts
C. HYDRAULIC LIFT CONTROL LEVERS
1. Remove the screw (1).
2. Loosen and remove the bolts (2) and take out the
composed parts as a unit.
6-28
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
48.1 ~ 55.8 N·m
4.9 ~ 5.7 kgf·m
35.5 ~ 41.2 lbf·ft
(1) Joint Bolt
(2) O-Ring
(3) Delivery Pipe 2
(4) Nut
(5) Spring Washer
(1) Screw
(2) Bolt
(3) Lock Washer
(4) Seal
(5) Support
(6) Pitman Arm
(7) Clutch
(8) Spring
(9) Screw
(10) Clutch Hub
(11) O-Ring
(12) Snap Ring
569W636A
(6) Bolt
(7) Bolt
(8) Bolt
(9) Bolt
569W638A
(13) Flange
(14) Clutch Hub
(15) Spring
(16) Screw
(17) Lock Washer
(18) Bolt
(19) Shaft
(20) Clutch
(21) Control Lever
(22) Snap Ring
(23) Screw
D569-W02 May-2003