Assembling And Disassembling - Cub Cadet 8454 Service Manual

CHAPTER 6 8454

2.3 ASSEMBLING AND DISASSEMBLING

A. SOLENOID VALVE
a . To Disassembling
(1) Solenoid Ass'y
(2) Spring
(3) Spring
(4) Spool
Spool
1. Loosen the bolt on the cover (1) and remove the
cover.
2. Take out the spring and spool.
• Hold the body to Disassembling the
cover (however, do not hold the sole-
noid section).
CAUTION
6-44
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(5) Spool
(6) Plug
(7) Wire Lead
Solenoid
1. Loosen the sectional end of the solenoid with a
spanner.
2. Take out the solenoid ass'y and the spring.
CAUTION
CAUTION FOR ASSEMBLY:
• Be careful of the direction of the spool when assem-
bling.
• Apply oil sufficiently to the spool body after washed,
not to cause damage thereon when assembling.
• Be careful of the direction of the sole-
noid lead line when assembling.
D569-W02 May-2003
569W656A