Cub Cadet 8454 Service Manual page 173

• Clearance Between Differential Case Bore
(Differential Case Cover Bore) and Differen-
tial Side Boss
1. Measure the bore I.D. of the differential case and
differential case cover.
2. Measure the differential side gear boss O.D. and
calculate the clearance.
3. If the clearance exceeds the allowable limit, replace
them.
Clearance Factory
between differen- spec.
tial case bore and
Allowable
differential side
limit
gear boss
Clearance Factory
between differen- spec.
tial case bore and
Allowable
differential side
limit
gear boss
Clearance between Factory
differential case spec.
cover bore and
Allowable
differential side
limit
gear boss
Differential case Factory
cover bore I.D spec.
Differential side Allowable
gear bore O.D limit
D569-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
0.05 ~ 0.151 mm
0.00197 ~ 0.00594 in.
0.035 mm
0.0138 in.
40.5000 ~ 40.550 mm
1.59449 ~ 1.59646 in.
40.388 ~ 40.450 mm
1.59008 ~ 1.59252 in.
0.05 ~ 0.151 mm
0.00197 ~ 0.00594 in.
0.035 mm
0.0138 in.
40.5000 ~ 40.550 mm
1.59449 ~ 1.59646 in.
40.388 ~ 40.450 mm
1.59008 ~ 1.59252 in.
TRANSMISSION SYSTEM
569W4B4A
4-69