Cub Cadet 8454 Service Manual page 318

CHAPTER 9 8454
4. Open drain cock located in right of front axle frame,
drain coolant, remove heat hose 2 pieces (7) con-
nected to connecting pipe, and then remove air
conditioner hose (4, 5).
Remove wiring jack connected to the bottom of
cabin.
5. Remove clutch rod (4) connected to clutch lever and
then brake rod (3) connected to brake lever (left,
right). Remove accelerator cable and instrument
panel cable.
6. Remove all knobs in cabin and then right hydraulic
lever guide and plate. Remove main transmission
and PTO device from left of cabin.
9-4
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) Aircon. Unit
(2) R/D
(3) Compressor
(4) Aircon. Hose 1
(5) Aircon. Hose 2
(1) Clutch Pedal
(2) Break Pedal
(1) Guide, Hyd. Lever
(2) Plate
569W904A
(6) Heater Ass'y
(7) Heater Hose
(8) Pipe
(9) Wiring Jack
569W905A
(3) Break Rod
(4) Clutch Rod
569W906A
(3) Boot
D569-W02 May-2003