Cub Cadet 8454 Service Manual page 308

CHAPTER 8 8454
B. OPERATION OF START MOTOR
a. Starter
The magnet-switch type starter is composed of two main sections. The first section converts battery current into
mechanical rotation to turn the engine crankshaft. It is composed of the field coil, armature, brush, commutator,
pinion, overrunning clutch, etc. The second section allows the pinion and flywheel to engage together and current to
flow through the motor section. It is composed of the pull-in coil, holding plunger, drive lever, contact plate, etc.
(A) Construction
(1) lever
(2) Internal Gear Ass'y
(3) Front Bracket Ass'y
(4) Needle Bearing
(5) 6 Roller ORC Ass'y
(B) Starter circuit
(1) PC : Pull-in coil
(2) HC : Holding coil
(3) S : Switch
(4) Drive lever clutch
(5) Screw spline
8-10
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(6) Planet Gear Ass'y
(7) Armature Ass'y
(8) Field Coil
(9) Aual Brush
(10) Through Bolt
(6) Armature
(7) Pole cor
(8) Commutator
(9) Contact plate
(11) Needle Bearing
(12) Rear Bracket Ass'y
(13) Nut
(14) Holding Coil
(15) Magnet Switch Ass'y
D569-W02 May-2003
569W805A
569W806A