Disassembling Rear Axle Case - Cub Cadet 8454 Service Manual

CHAPTER 7 8454
5.4 DISASSEMBLING REAR AXLE
CASE
Rear Axle Case
1. Support the transmission case with nylon lift strap
and hoist.
2. Loosen and remove the rear axle case mounting
screws (1), spring washer (3) and nuts (2).
3. Support the rear axle case (4) with nylon lift strap
and hoist.
4. Carefully move the axle assembly out and away from
the tractor.
(When reassembling)
Tightening Rear axle case
torque mounting
screws
Rear axle case
mounting nuts
Brake shaft
(LH, RH)
Parking brake
shaft mounting
bolt
Brake rod
mounting nut
7-14
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
77.5 ~ 90.2 N·m
7.9 ~ 9.2 kgf·m
57.1 ~ 66.5 lbf·ft
77.5 ~ 90.2 N·m
7.9 ~ 9.2 kgf·m
57.1 ~ 66.5 lbf·ft
367.8 ~ 431.8 N·m
37.5 ~ 44.0 kgf·m
271.2 ~ 318.2 lbf·ft
23.5 ~ 27.4 N·m
2.4 ~ 2.8 kgf·m
17.3 ~ 20.2 lbf·ft
48.0 ~ 55.9 N·m
4.9 ~ 5.7 kgf·m
35.4 ~ 41.2 lbf·ft
(1) Bolt
(2) Nut
(3) Spring Washer
569W724A
(4) Rear Axle Case
(5) Brake Case
D569-W02 May-2003