Cub Cadet 8454 Service Manual page 171

[A] FIT Groove
(1) Differential Pinion Shaft
(2) Differential Pinion
(3) Differential Pinion
(4) Differential Pinion Washer
(5) Differential Pinion Shaft 2
(6) Differential Side Gear
(7) Differential Side Gear Washer
(8) Differential Cover
(9) Differential Case
(10) Differential Lock Shifter
(11) Spiral bevel Gear
• Differential Side Gear
1. Take out the differential side gear (2) and differen-
tial side washer (1).
(When reassembling)
• Check the thrust and bearing surface of both differ-
ential side gears (2). If they are worn or damaged,
bores in the differential case may also be damaged.
Be sure to replace their parts.
• Checking Bearing
1. Hold the inner race, and push and pull the outer
race in all directions to check for wear and
roughness.
2. Apply transmission fluid to the bearing, and hold
the inner race. Then, turn the outer race to check
rotation.
3. If there is any defect, replace it.
D569-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
TRANSMISSION SYSTEM
(1) Differential Side Gear Washer
(2) Differential side Gear
569W4A9A
569W4B0A
569W4B1A
4-67