Table of Contents
Advertisement
CHAPTER 6
8454
6. Take out spacers (5), (7) and O-ring (6) located in-
side the inner spline of the rotor (10) in gerotor (4).
•
There is no spacer in the power steer-
ing units of outlet capacities of 31 cc/
rev and 51 cc/rev.
CAUTION
7. Disassembling the gerotor. Be careful not to drop
the rotor from the outer ring of the gerotor.
8. Take out spacer plate (8) and O-ring (9).
9. Take out drive (11).
10. Remove O-ring out of the housing.
6-60
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(4) Stator
(5) Spacer
(6) O-ring
(8) Spacer Plate
(9) O-ring
569W682A
(7) Spacer
(10) Rotor
569W683A
(11) Drive
D569-W02 May-2003
Advertisement
Table of Contents
Troubleshooting
