CHAPTER 7
8454
Brake Disc Wear
1. Measure the brake disc thickness with venire
calipers.
2. If the thickness is less than the allowable limit, re-
place it.
Brake disc
Factory
thickness
spec.
Allowable
limit.
Brake Dise Wear
1. Measure the plate thickness with venire calipers.
2. If the thickness is less than the allowable limit, re-
place it.
Plate
Factory
thickness
spec.
Allowable
limit.
7-18
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
4.6 ~ 4.8 mm
0.181 ~ 0.189 in.
4.0 mm
0.1574 in.
2.54 ~ 2.66 mm
0.1000 ~ 0.1047 in.
2.0 mm
0.0787 in.
569W731A
569W732A
D569-W02 May-2003