Enabling Svom Boot Watchdog Functionality - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX300 S7:

Table of Contents

Basic software procedures

Enabling SVOM boot watchdog functionality

If ServerView Operation Manager boot watchdog functionality has been

disabled for firmware upgrade purposes (see section

to be re-enabled to complete the maintenance task.

Timer settings can be configured in the BIOS or using the ServerView iRMC

web frontend:

Configuring boot watchdog settings in the BIOS

Ê Enter the BIOS.

Ê Select the Server Mgmt menu.

Ê Under Boot Watchdog set the Action setting to Reset.

Ê Save your changes and exit the BIOS.

For detailed information on how to access the BIOS and modify settings,

refer to the "System Board D2949 BIOS Setup Utility" reference manual.

Configuring boot watchdog settings using the iRMC web frontend

Ê Enter the ServerView iRMC web frontend.

Ê Select the Server Management menu.

Ê Under Watchdog Settings ensure that the check box next to Boot Watchdog is

selected. From the drop down list choose Reset and specify the desired

timeout delay.

Ê Click Apply for the changes to take effect.

For detailed information on iRMC settings, refer to the "Integrated

Remote Management Controller" user guides available online at

http://manuals.ts.fujitsu.com (http://jp.fujitsu.com/platform/server/primergy/

for the Japanese market) or from the ServerView Suite DVD 2

supplied with your PRIMERGY server.

Upgrade and Maintenance Manual

5.1.2 on page

134), it has

TX300 S7 / RX350 S7

Primergy tx350 s7