Replacing Van Seat Armrest Assembly - Invacare Pronto M50 Service Manual

SECTION 5—ARMS
Angle
Armrest
Count Exposed Threads
FIGURE 5.2 Adjusting Van Seat Arm Height (Adjustable Height Arms Only)

Replacing Van Seat Armrest Assembly

NOTE: For this procedure, refer to FIGURE 5.3.
1. If necessary, remove the joystick. Removing/Installing the Joystick on page 120.
2. Remove the mounting screw, washers and locknut that secure the existing armrest
assembly to the arm post.
3. Position the new armrest assembly on the armrest post and secure with the mounting
screw, washers, and locknut. Refer to FIGURE 5.3 for correct hardware orientation.
4. If necessary, install the joystick. Removing/Installing the Joystick on page 120.
5. Repeat STEPS 1-4 for the opposite armrest assembly, if necessary.
Mounting Screw
Washers
FIGURE 5.3 Replacing Van Seat Armrest Assembly
Pronto® Series
Pinch Point
Socket Screw
Jam Nut
Washer
46
Height
Height
Adjustment
Holes
Lock Knob
Armrest
Assembly
Arm Post
Locknut
Armrest
Arm Frame
Assembly
Part No. 1125075