Invacare Pronto M50 Service Manual page 52

SECTION 6—VAN SEAT
NOTE: Refer to Detail "A" of FIGURE 6.5 for proper seat depth positions. For example, to achieve
maximum seat depth, the front mounting hole on the seat back bracket aligns with the third hole
on the seat base.
5. Perform one of the following:
• For Standard Van Seat -
i. Install the seat base onto the seat assembly. Refer to Adjusting Seat Position on
Seat Base on page 56.
ii. Go to STEP 6.
• For Office Style Seat - Go to STEP 6.
6. Reinstall the seat base onto the seat assembly. Refer to Adjusting Seat Position on Seat
Base on page 56.
7. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50.
Seat Back Bracket
Seat
Base
Mounting
Holes
Seat Back
NOTE: Office style van seat is shown.
Standard van seat adjusts the same way.
Pronto® Series
Mounting Screws
FIGURE 6.5 Adjusting Seat Depth
DETAIL "A" - SEAT DEPTH POSITIONS
Seat Depth Seat Size
16 inch
16 inch
18 inch
18 inch
Seat Depth Seat Size
18 inch
18 inch
20 inch
20 inch
52
Minimum Seat Depth
16 X 18 inch
18 X 18 inch
20 X 20 inch
22 X 20 inch
Middle Seat Depth
Seat Depth Seat Size
17 inch 16 X 18 inch
17 inch 18 X 18 inch
19 inch 20 X 20 inch
19 inch 22 X 20 inch
Maximum Seat Depth
16 X 18 inch
18 X 18 inch
20 X 20 inch
22 X 20 inch
Part No. 1125075