Removing/Installing The Front Shroud; Removing; Installing - Invacare Pronto M50 Service Manual

FIGURE 10.2 Removing/Installing the Side Shrouds

Removing/Installing the Front Shroud

NOTE: For this procedure, refer to FIGURE 10.3 on page 90.

Removing

1. Remove the two screws securing the top of the front shroud to the frame.
2. Remove the front shroud fo the frame.

Installing

1. Insert the tabs at the bottom of the front shroud into the slots in the bottom of the
frame.
2. Secure the top of the front shroud to the frame using the two screws. DO NOT
overtighten.
Part No. 1125075
Screws
Frame
SECTION 10—SHROUDS AND FRAME
Shroud Mounting Holes
89
Side
Shroud
Pronto® Series