Disconnecting/Connecting The Joystick; Disconnecting; Connecting - Invacare Pronto M50 Service Manual

Hex Mounting Screws
Adjustment Lock Lever
FIGURE 13.3 Repositioning the Joystick Mounting Bracket - ASBA Seat

Disconnecting/Connecting the Joystick

NOTE: For this procedure, refer to FIGURE 13.4 on page 124.

Disconnecting

1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and disconnect them by pulling
them apart.

Connecting

The joystick connector and controller connector fit together in one way only. DO
NOT force them together.
1. Hold the light GREY collar portion of the joystick connector with one hand and the
controller connector on the wheelchair in the other and align them.
2. Lightly push to engage the joystick connector and the controller connector.
Part No. 1125075
Washers
Mounting Bracket
Joystick Mounting Tube
CAUTION
123
SECTION 13—ELECTRONICS
Mounting Bracket
(Threaded Plate)
Arm Tube
Joystick
Pronto® Series