Adjusting The Speed; M50 And M51 Wheelchairs Manufactured Before 8/15/05; M50/M51 Wheelchairs Manufactured After 8/14/05 And All M61 Wheelchairs - Invacare Pronto M50 Service Manual

Adjusting the Speed

M50 and M51 Wheelchairs Manufactured Before 8/15/05

NOTE: For this procedure, refer to FIGURE 4.4.
1. Turn the speed control knob to adjust
the speed:
• Clockwise - Increase speed.
• Counterclockwise - Decrease speed.
M50/M51 Wheelchairs Manufactured After 8/14/05 and All M61
Wheelchairs
NOTE: For this procedure, refer to FIGURE 4.5 on page 36.
1. Perform one of the following:
• Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button (
or hare button (
bars in the speedometer will light.
• Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps:
i. Press and hold both the tortoise button (
joystick beeps.
ii. Perform one of the following:
• Press the tortoise button (
speed in 20% increments. The larger bars in the speedometer will light.
• Press and hold the tortoise button (
decrease/increase the speed in smaller increments. The smaller bars in the
speedometer will light.
Part No. 1125075
) to decrease/increase the speed in 20% increments. The larger
) or hare button (
35
SECTION 4—WHEELCHAIR OPERATION
Speed
Control
Knob
FIGURE 4.4 Adjusting the Speed - M50 and
M51 Wheelchairs Manufactured Before
8/15/05
) and hare button (
) to decrease/increase the
) or hare button (
)
) until the
) to
Pronto® Series