Adjusting The Seat Height; M50/51 Wheelchairs Only - Invacare Pronto M50 Service Manual

SECTION 7—ASBA SEAT
Seat
Assembly
Seat Lever
Seat Post
FIGURE 7.1 Removing/Installing the Seat Assembly

Adjusting the Seat Height

M50/51 Wheelchairs Only

NOTE: For this procedure, refer to FIGURE 7.2 on page 61.
NOTE: The seat can be adjusted to five height positions in 1-inch increments.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 59.
2. Remove the mounting screw that secures the seat post to the support tube.
WARNING
Refer to the table in FIGURE 7.2 on page 61 for proper seat post mounting
positions. For users over 220 lbs - Mounting holes 3, 4 and 5 (in FIGURE 7.2) MUST
be used with the seat in the 1-inch back position (FIGURE 7.2). Refer to Adjusting
the Seat Position on page 65.
3. Adjust the seat post to desired mounting position.
60
Pronto® Series Part No. 1125075