Procedure 4 - Arms; Replacing Armrest Pads - Captains Van Seat; Replacing Captains Van Seat Armrest Plate - Invacare Arrow RWD Service Manual

PROCEDURE 4
This Procedure Includes the Following:
Replacing Armrest Pads - Captains Van Seats

Replacing Captains Van Seat Armrest Plate

A
After ANY adjustments, repair or service
R and BEFORE use, make sure that all attach-
ing hardware is tightened securely - oth-
M
erwise injury or damage may result.
S
REPLACING ARMREST PADS -
CAPTAINS VAN SEATS (FIGURE 1)
1. Remove the mounting screws that secures the front
of the armrest pad to the armrest plate.
2. Remove the mounting screw that secures the rear of
the armrest pad and armrest insert to the armrest
plate.
3. Remove the existing armrest pad and position the
NEW armrest pad on the armrest plate.
4. Line up the mounting holes in the armrest insert, arm-
rest plate and NEW armrest pad.
5. Reinstall the rear mounting screw through the arm-
rest insert, armrest plate and armrest pad and tighten
securely.
6. Reinstall the front mounting screw into the armrest
plate and NEW armrest pad and tighten securely.
REAR
Armrest
Insert
Mounting
Screw
FIGURE 1 - REPLACING ARMREST PADS -
CAPTAINS VAN SEATS
WARNING
FRONT
Armrest Plate
REPLACING CAPTAINS VAN SEAT
ARMREST PLATE (FIGURE 2)
1. If necessary, remove the three (3) mounting screws,
spacers and locknuts that secure the joystick mount-
ing bracket to the armrest plate.
2. Remove armrest pad. Refer to REPLACING ARM-
REST PADS - CAPTAINS VAN SEATS in this proce-
dure of the manual.
3. Remove the mounting screw, washers and locknut that
secure the existing armrest plate to the arm weldment.
4. Position the NEW armrest plate on the armrest weldment
and secure with the mounting screw, washers, and lock-
nut. Refer to FIGURE 2 for correct hardware orientation.
5. Reinstall van style armrest pad. Refer to REPLAC-
ING ARMREST PADS - CAPTAINS VAN SEATS in
this procedure of the manual.
6. If necessary, reinstall the three (3) mounting screws,
spacers and locknuts that secure the joystick mount-
ing bracket to the armrest plate.
7. Repeat STEPS 1-6 for the opposite armrest plate, if
necessary.
Washer
Mounting
Screw
Armrest
Pad
Arm
Weldment
Mount-
FIGURE 2 - REPLACING CAPTAINS VAN SEAT
ing
Screw
18
Locknut
Armrest
Washer
ARMREST PLATE
ARMS
Plate