Replacing The Armrest Assembly - Invacare Pronto M41 Service Manual

SECTION 5—ARMS

Replacing the Armrest Assembly

NOTE: For this procedure, refer to FIGURE 5.3 on page 35.
1. If necessary, remove the joystick. Removing/Installing the Joystick on page 71.
2. Remove the mounting screw, three washers, and locknut that secure the existing
armrest to the arm post.
3. Discard the old/existing armrest.
4. Position the new armrest on the armrest post and secure with the mounting screw,
three washers, and locknut.
5. If necessary, install the joystick. Removing/Installing the Joystick on page 71.
6. Repeat STEPS 1-4 for the opposite armrest if necessary.
®
Pronto M41
36
Part No 1145724