SECTION 7—ASBA SEAT
Mounting Screws
1-inch
Adjustment
Spacers
Removing/Installing the Seat Positioning Strap
NOTE: For this procedure, refer to FIGURE 7.7 on page 67.
1. Remove the seat cushion from the seat pan.
2. Move the flip back armrests out of the way.
3. Remove the two mounting screws, quick release pin tabs, spacers, and locknuts that
secure the seat pan and seat positioning straps to the seat frame.
4. Remove the two halves of the seat positioning strap from the rear seat frame.
5. Reposition the two new seat positioning strap halves underneath seat rails.
6. Reinstall the two mounting screws, quick release pin tabs, spacers, and locknuts that
secure the seat pan and seat positioning straps to the seat frame and torque to
75 in-lbs.
7. Reinstall the seat cushion onto the seat pan.
Pronto® Series
Seat Frame Plate
1-inch
Adjustment
Spacers
Seat Pivot
Washers
Locknuts
FIGURE 7.6 Adjusting the Seat Position
66
DETAIL "A" - SEAT ADJUSTMENT
POSITIONS
Standard
Position
1-inch
Forward
Position
1-inch
Rearward
Position
Part No. 1125075