Spj Information Gauge Display Diagnostics - Invacare Pronto M50 Service Manual

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
SPJ
Information Gauge Display Diagnostics
DISPLAY
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
INVACARE
Pronto® Series
DESCRIPTION
All three LEDs are Off.
All three LEDs are On.
RED LED is flashing.
Left to Right "chase"
alternating with steady
display.
GREEN LED is flashing.
All LEDs are flashing slowly. Joystick has detected Out-
All LEDs are flashing
quickly.
DEFINITION
Power is Off.
Power is On.
Battery charge is low.
Joystick is in
programming, inhibit
and/or charging mode.
Joystick is in Speed Limit
mode.
of-Neutral-at-Power-Up
mode.
Joystick has detected a
fault.
22
COMMENTS
Fewer than three LEDs
On implies reduced
battery charge.
The batteries should be
charged as soon as
possible.
The steady LEDs indicate
the current state of the
battery charge.
The current state of
battery charge will be
displayed at the same
time.
Release the joystick back
to Neutral.
Joystick uses Flash codes
to indicate faults.
Part No. 1125075