Utilities: Lamp; Utilities: 1:1 Manual Switch; Utilities: Circuit Id - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Front Panel Operation
6.3.6.3

UTILITIES: LAMP

FRONT PANEL LAMP TEST: XXXXXXX
Select enable or disable, using the [↑][↓] arrow keys, then press ENTER.
This will test all of the LEDs on the front panel then resume normal operations.
6.3.6.4

UTILITIES: 1:1 MANUAL SWITCH

PRESS ENTER KEY TO FORCE UNIT INTO
STANDBY (1:1 ONLY)
If the unit is part of a 1:1 redundant pair of modems, and this unit, is currently on-line,
pressing ENTER will cause the unit to switch to standby.
6.3.6.5

UTILITIES: CIRCUIT ID

EDIT THIS MODEM'S CIRCUIT ID:
----------------------------------------
Edit the Circuit ID string, using the [←][→] and [↑] [↓] arrow keys. Only the bottom line
is available (40 characters). Use the [←][→] arrow keys to position the cursor on to the
character to be edited. Edit the character using [↑] [↓] arrow keys. The following
characters are available:
Space ( ) * + - , . / 0-9 and A-Z.
When the user has composed the string, press ENTER.
6–41
Revision 7
MN/CDM600.IOM