Ssi=,; Tim=, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
Statistics SSI= 1 byte,
Sample numerical
Interval
Number of N/A 3 bytes
Unread
stored
Statistics
Retrieve next N/A 135 bytes
5 unread
Stored
Statistics
Description of Arguments
Command or Query.
Used to set the sample interval for the Statistics Logging
Function
SSI=x, where x= 0 to 9 in 10 minute steps.
Note: Setting this parameter to 0 disables the statistics
logging function.
Example: SSI=3 means 30 minutes
Query only.
Unit returns the number of stored Statistics, which
remain Unread, in the form xxx (0-199).
Note: This means unread over the remote control.
Example: NUS=187
Query only.
Unit returns the oldest 5 Stored Statistics, which have
not yet been read over the remote control.
Reply format:
[CR]sub-body[CR]sub-body[CR]sub-body[CR]sub-
body[CR]sub-body,
where Sub-body=AA.ABB.BC.CD.Dddmmyyhhmmss,
AA.A=Minimum Eb/No during sample period.
BB.B=Average Eb/No during sample period.
C.C=Max. Tx Power Level Increase during sample
period.
D.D=Average Tx Power Level Increase during sample
period.
ddmmyyhhmmss = date/time stamp.
If there are no new events, the unit replies with RNS*.
If there are less than 5 statistics to be retrieved, the
remaining positions are padded with zeros.
16–28
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
SSI= SSI? SSI=x
SSI? (see description for
details of argument)
SSI*
SSI#
N/A NUS? NUS=xxx
(see description of
arguments)
N/A RNS? RNS=[CR]AA.ABB.B
C.CD.Dddmmyyhhm
mss[CR]AA.ABB.BC.
CD.Dddmmyyhhmm
ss[CR]AA.ABB.BC.C
D.Dddmmyyhhmmss
[CR]AA.ABB.BC.CD.
Dddmmyyhhmmss[C
R]AA.ABB.BC.CD.Dd
dmmyyhhmmss
(see description for
details of
arguments)
Revision 7