Adj=,; Efr=,; Wrm=, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
External EFR= 1 byte, value
Frequency of 0 thru 5
Reference
Internal ADJ= 4 bytes,
10MHz numeric
Reference
Adjustment
Warm-up WRM= 1 byte, 0 or 1
Delay
Description of Arguments
Command or query. (Hi-stab Ref parameter)
Requires hardware Rev. 2.0 or greater and High-Stability
Frequency Reference module to be installed.
0 = Internal 10MHz (default when module is not
installed)
1 = External 1 MHz
2 = External 2 MHz
3 = External 5 MHz
4 = External 10 MHz
5 = External 20 MHz
See the EID response for indication that a high-stability
module is installed.
Command or query. (Hi-stab Ref parameter)
This command provides fine adjustment of the Internal
10MHz Reference on the High-Stability Frequency
Reference module.
Format is sddd, where:
s = sign (+ or –)
ddd = value, 0-999
If High-Stability module is not installed, response to
query is ADJ*.
Command or query. (Hi-stab Ref parameter)
0 = Delay off (instant on)
1 = Warm-up Delay on
If Hi-Stability module is not installed, response to query
is WRM*.
16–23
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
EFR= EFR? EFR=x
EFR? (see description of
arguments)
EFR*
EFR#
ADJ= ADJ? ADJ=sddd
ADJ? (see description of
arguments)
ADJ*
ADJ#
WRM= WRM? WRM=x
WRM? (see description of
arguments)
WRM*
WRM#
Revision 7