Dts=, - Comtech EF Data CDM-600 Installation And Operation Manual

CDM-600 Satellite Modem
Remote Control
Command
Arguments for
Parameter
(Instruction Command or
Code and Response to
Type
Query
Qualifier)
Insert ITS= 3 bytes
Timeslot
Bulk Status N/A 28 bytes
Query
Description of Arguments
Command or query.
(Note different format between command and query.)
Command format: ITS=xxy
Where xx = Channel 01 through 24
y = timeslot: 0-9, A=10, B=11, C=12, D=13,...V=31
Query only.
The response has the format:
abcccc,ddddd,eefffffggggghhh,
where:
a is as LRS? response
b is as RED? response
cccc is as EBN? response
ddddd is as BER? response
eeeee is as BFS? response
fffff is as RFO? response
ggggg is as RSL? response
hhh is as TMP? response
This command is intended to reduce the need for
excessively frequent queries to a modem, and will be
useful for a unit in a redundancy system, where the
redundancy system has monitoring of its own occurring.
The latter 6 parameters are only updated once per
second.
16–37
MN/CDM600.IOM
Query
Response
(Instruction
to Response to Query
Code and
Command
Qualifier)
ITS= ITS? ITS=yyyyyyyyyyyyyy
yyyyyyyyyy
ITS?
ITS*
indicating all 24
ITS#
Insert timeslots
values associated
with the 24 Rx
Satellite channels.
N/A BSQ? BSQ=abcccc,ddddd,
eefffffggggghhh
Revision 7